Archive for the ‘IP’ Tag

Windows System Error – “IP Address Conflict”

Few days ago at work, two of the computers from the office kept showing a Windows message “there is an IP address conflict with another system on the network”. Now this has never happened to any of the computers before, and there is a hand full of them. Also, they are all connected to a linksys router (not wireless).What the message means is that two or more computer have the same IP address, which has to be change. No computer can have the same IP address, and this was caused most likely by the router (either the company providing the internet having trouble or the actual router malfunctioned).

errormsg.jpg

To fix this you will have to figure out which computer is causing the problem, by trail and error.

  1. Pick a computer
  2. Click the Network Connection button located at the lower right corner of the start toolbar close to the clock ( or go to Start>Connect to*>Choose your connection).
  3. Click on the Disable Button.
    wire.jpg

  4. Once the connection is disabled, re-enable it the same way.
  5. If it does not enable, and it can not assign an IP address to the computer go to the other computer
  6. On the other compute, follow Steps 1-4.
  7. With the 1st computer’s connection being disabled, this one will not give you trouble and should re-enable.
  8. Go back to the 1st computer and re-enable the connection.
  9. In the same connection window, click the Support Tab on the top.
  10. Compare the two IP addresses, they should be different.
    If they are not, restart the computer ( it shouldn’t be need to).

Note: Connect To* – If you do not see Connect To in the Start listed,

  1. Right click on Start
  2. Click on Properties
  3. Click the Customizable Button
  4. Click the Advanced Tab in the new window
  5. Scroll to Network Connection
  6. Check the “Display as connected to menu”
  7. Click OK and Close out of it.

start.jpg